Jitter-Packetnum - H3C S3100 Series Command Manual

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
undo jitter-interval
View
HWPing test group view
Parameters
interval: Interval in milliseconds between jitter test packets. The value is in the range of
10 to 1000.
Description
Use the jitter-interval command to configure the interval between sending jitter test
packets.
Use the undo jitter-interval command to restore the default.
By default, the interval between sending jitter test packets is 20 milliseconds.
Related commands: jitter-packetnum.
Note:
The jitter-interval command applies to jitter tests only.
Examples
# Set the interval between sending jitter test packets to 30 milliseconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator jitter
[Sysname-hwping-administrator-jitter] test-type jitter
[Sysname-hwping-administrator-jitter] jitter-interval 30

1.1.17 jitter-packetnum

Syntax
jitter-packetnum number
undo jitter-packetnum
View
HWPing test group view
1-20
Chapter 1 HWPing Commands