Mac-Address Multicast Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Multicast
H3C S3100 Series Ethernet Switches

2.1.4 mac-address multicast vlan

Syntax
mac-address multicast mac-address vlan vlan-id
undo mac-address multicast [ [ mac-address ] vlan vlan-id ]
View
Ethernet port view
Parameters
mac-address: Multicast MAC address in the form of H-H-H.
vlan vlan-id: Specifies the VLAN the current port belongs to. The effective range for
vlan-id is 1 to 4094.
Description
Use the mac-address multicast vlan command to create a multicast MAC address
entry on the current port.
Use the undo mac-address multicast vlan command to remove the specified
multicast MAC address entry or all multicast MAC address entries on the current port.
Each multicast MAC address entry contains the multicast address, forwarding port, and
VLAN ID information.
Related commands: display mac-address multicast static.
Examples
# Create a multicast MAC address entry on Ethernet 1/0/1 in VLAN 1, with the multicast
address of 0100-1000-1000.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] mac-address multicast 0100-1000-1000 vlan 1
2.1.5 multicast-source-deny
Syntax
multicast-source-deny [ interface interface-list ]
undo multicast-source-deny [ interface interface-list ]
View
System view, Ethernet port view
Chapter 2 Common Multicast Configuration
2-4
Commands