H3C S3100 Series Command Manual page 827

Command Manual (For Soliton) – File System Management
H3C S3100 Series Ethernet Switches
View
User view
Parameter
webfile: Name of a Web file, a string comprising 5 to 127 characters (including the
extension .web).
main: Specifies the file to be with the main attribute.
backup: Specifies the file to be with the backup attribute.
Description
Use the boot web-package command to configure a Web file in the device to be with
the main or backup attribute.
Caution:
The configuration of the main or backup attribute for a Web file takes effect
immediately without restarting the device.
After you upgrade a Web file, you need to specify the new Web file in the Boot menu
after restarting the switch or specify a new Web file by using the boot web-package
command. Otherwise, the Web server cannot function normally.
Related commands: display web package
Example
# Configure the Web file named boot.web to be with the main attribute.
<Sysname> boot web-package boot.web main
1.2.5 display boot-loader
Syntax
display boot-loader [ unit unit-id ]
View
Any view
Parameter
unit unit-id: Specifies the unit ID of a switch. You cannot choose any other number
except 1 for S3100 series Ethernet switches.
Chapter 1 File System Management
1-19
Configuration Commands