Chapter 1 Mirroring Commands; Display Mirroring-Group - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Mirroring
H3C S3100 Series Ethernet Switches

Chapter 1 Mirroring Commands

1.1 Mirroring Commands

1.1.1 display mirroring-group

Syntax
display mirroring-group { group-id | all | local | remote-destination |
remote-source }
View
Any view
Parameters
group-id: Specifies the mirroring group of which the configurations are to be displayed,
the value of which can only be 1.
all: Specifies to display the parameter settings of all mirroring groups.
local: Specifies to display the parameter settings of local port mirroring groups.
remote-destination: Specifies to display the parameter settings of the destination
groups for remote mirroring.
remote-source: Specifies to display the parameter settings of the source groups for
remote mirroring.
Description
Use the display mirroring-group command to display port mirroring configurations.
Related
monitor-port.
Examples
# Display the configurations of a local mirroring group on your S3100 series Ethernet
switch.
<Sysname> display mirroring-group 1
mirroring-group 1:
type: local
status: active
mirroring port:
monitor port: Ethernet1/0/4
commands: mirroring-group
Ethernet1/0/1 both
mirroring-port,
1-1
Chapter 1 Mirroring Commands
mirroring-group