Snmp-Agent Group - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches

2.1.5 snmp-agent group

Syntax
In SNMPv1 and SNMPv2c:
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
In SNMPv3:
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameters
v1: SNMPv1.
v2c: SNMPv2c.
v3: SNMPv3.
group-name: Group name. This argument can be of 1 to 32 characters.
authentication: Specifies to authenticate SNMP data without encrypting the data.
privacy: Authenticates and encrypts packets.
read-view: Name of the view to be set to read-only. This argument can be of 1 to 32
characters.
write-view: Name of the view to be set to readable & writable. This argument can be of
1 to 32 characters.
notify-view: Name of the view to be set to a notifying view. This argument can be of 1 to
32 characters.
acl acl-number: Specifies an ACL. The acl-number argument ranges from 2,000 to
2,999.
Description
Use the snmp-agent group command to create an SNMP group. You can also
optionally use this command to apply an ACL to filter network management users.
Use the undo snmp-agent group command to remove a specified SNMP group.
By default, the SNMP group configured through the snmp-agent group v3 command
is not authenticated or encrypted.
Chapter 2 Commands for User Control
2-4