H3C S3100 Series Command Manual page 916

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Parameter
file-ulr: Path plus name of a Boot ROM file (that is, a .btm file) in the Flash, a string of 1
to 64 characters.
device-name: File name, beginning with a device name in the form of unit[NO.]>flash,
used to indicates that the specified file is stored in the Flash memory of a specified
switch.
Description
Use the boot bootrom command to update the Boot ROM. The updated Boot ROM is
used at next startup.
Example
# Update the Boot ROM of the switch using the file named Switch.btm.
<Sysname> boot bootrom Switch.btm
This will update Bootrom on unit 1.
Upgrading Bootrom, please wait...
Upgrade Bootrom succeeded!
3.1.3 display boot-loader
Syntax
display boot-loader [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
Description
Use the display boot-loader command to display the host software (.bin file) that will
be adopted when the switch starts up next time.
Example
# Display the host software that will be adopted when the switch starts up next time.
<Sysname> display boot-loader
Unit 1:
The current boot app is: Switch.bin
The main boot app is:
The backup boot app is:
Continue? [Y/N] y
Switch.bin
3-2
Chapter 3 Device Management
Commands