Set Authentication Password - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
display
nslookup
ping
quit
super
telnet
tracert
undo

1.1.19 set authentication password

Syntax
set authentication password { cipher | simple } password
undo set authentication password
View
User interface view
Parameters
cipher: Specifies to save the local password in cipher text.
simple: Specifies to save the local password in plain text.
password: Password to be set. The password must be in plain text if you specify the
simple keyword in the set authentication password command. If you specify the
cipher keyword, the password can be in either cipher text or plain text, as described in
the following.
When you enter the password in plain text containing no more than 16 characters
(such as 123), the system converts the password to the corresponding
24-character encrypted password.
When you enter the password in cipher text containing 24 characters, make sure
you are aware of the corresponding password in plaintext. For example, the plain
text "123456" corresponds to the cipher text "OUM!K%F<+$[Q=^Q`MAF4<1!!".
Description
Use the set authentication password command to set the local password.
Use the undo set authentication password command to remove the local password.
Note that only plain text passwords are expected when users are authenticated.
Display current system information
Query Internet name servers
Ping function
Exit from current command view
Set the current user priority level
Establish one TELNET connection
Trace route function
Cancel current setting
1-22
Chapter 1 Login Commands