Display Ip Routing-Table Verbose - H3C S3100 Series Command Manual

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
Table 1-7 Description on the fields of the display ip routing-table statistics
command
Field
Proto
route
active
added
deleted
Total

1.1.12 display ip routing-table verbose

Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Use the display ip routing-table verbose command to display the detailed
information about a routing table.
You can use this command to display all the routes, including the inactive and invalid
routes.
Example
# Display the detailed information about the routing table.
<Sysname> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both
Destinations: 2
Holddown: 0
**Destination: 127.0.0.0
Routing protocol
Total number of routes
Number of the active routes that are currently in use
Number of the routes that are added to the routing table after the
switch starts or the routing table is cleared last time
Number of the routes with deleted flags (this type of routes will be
removed after a period of time)
Total numbers of various routes
Routes: 2
Delete: 0 Hidden: 0
Mask: 255.0.0.0
1-15
Chapter 1 Management VLAN Configuration
Description
* = Next hop in use
Commands