Display Storm-Constrain - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
For the two ports forming a combo port, the one in active state is currently enabled and
the one in inactive state is currently disabled. You can refer to the
to change the state of the two ports.
Note:
For information about combo port, refer to H3C S3100 Series Ethernet Switch
Installation Manual.

1.1.9 display storm-constrain

Syntax
display storm-constrain [ interface interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
|: Uses a regular expression to filter the output configuration information.
begin: Displays the configurations that begin with the string specified by
regular-expression.
exclude: Displays the configurations that do not contain the string specified by
regular-expression.
include: Displays the configurations that contain the string specified by
regular-expression.
regular-expression: Regular expression.
Description
Use the display storm-constrain command to display the storm control
configurations.
Examples
# Display the storm control configurations.
<Sysname> display storm-constrain
Flow Statistic Interval: 5(second)
Chapter 1 Port Basic Configuration
1-15
Commands
shutdown command