Reset Dot1X Statistics - H3C S3100 Series Command Manual

Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
checking for specified Ethernet ports.
By default, 802.1x client version checking is disabled on all the Ethernet ports.
In system view:
If you do not provide the interface-list argument, these two commands apply to all
the ports of the switch.
If you specify the interface-list argument, these commands apply to the specified
ports.
In Ethernet port view, the interface-list argument is not available and the commands
apply to only the current Ethernet port.
Example
# Configure Ethernet 1/0/1 port to check the version of the 802.1x client upon receiving
authentication packets.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x version-check

1.1.19 reset dot1x statistics

Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list, in the form of interface-list= { interface-type
interface-number [ to interface-type interface-number ] } &<1-10>, in which
interface-type specifies the type of an Ethernet port and interface-number is the
number of the port. The string "&<1-10>" means that up to 10 port lists can be provided.
Description
Use the reset dot1x statistics command to clear 802.1x-related statistics.
To retrieve the latest 802.1x-related statistics, you can use this command to clear the
existing 802.1x-related statistics first.
When you execute this command,
If the interface-list argument is not specified, this command clears the global 802.1x
statistics and the 802.1x statistics on all the ports.
Chapter 1 802.1x Configuration Commands
1-24