System-Monitor Enable - H3C S3100 Series Command Manual

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Related command: reboot, schedule reboot at, undo schedule reboot, display
schedule reboot.
Example
# Schedule a reboot so that the switch reboots at 10:00 every Thursday.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] schedule reboot regularity at 10:00 thursday
Schedule reboot regularity, are you sure?[Y/N]:y
[Sysname]

3.1.17 system-monitor enable

Syntax
system-monitor enable
undo system-monitor enable
View
System view
Parameter
None
Description
Use the system-monitor enable command to enable real-time monitoring of the
running status of the system.
Use the undo system-monitor enable command to disable real-time monitoring of the
running status of the system.
This function enables you to dynamically record the system running status, such as
CPU, thus facilitating analysis and solution of the problems of the device.
By default, real-time monitoring of the running status of the system is enabled.
Caution:
Enabling of this function consumes some amounts of CPU resources. Therefore, if your
network has a high CPU usage requirement, you can disable this function to release
your CPU resources.
3-18
Chapter 3 Device Management
Commands