H3C S3100 Series Command Manual page 613

Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Example
# Generate statistics on the packets that match ACL 2000 and pass Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 1.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] traffic-statistic inbound ip-group 2000
1.1.38 traffic-statistic vlan
Syntax
traffic-statistic vlan vlan-id inbound acl-rule
undo traffic-statistic vlan vlan-id inbound acl-rule
View
System view
Parameter
vlan-id: VLAN ID, in the range 1 to 4094.
inbound: Generates statistics on inbound packets.
acl-rule: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
that the ACL rules referenced must be those defined with the permit keyword specified.
Description
Use the traffic-statistic vlan command to generate statistics on packets that match
specific ACL rules and are of a specific VLAN.
Use the undo traffic-statistic vlan command to cancel the configuration.
Note that, for the same ACL rule, the traffic accounting function and the meter statistic
keyword of the traffic-limit command are mutually exclusive in a VLAN.
Note:
The traffic accounting function configured on a VLAN is only applicable to packets
tagged with 802.1Q header.
Related command: display qos-vlan, reset traffic-statistic vlan.
1-43
Chapter 1 QoS Commands
Table 1-8 and Table 1-9. Note