Dot1X Guest-Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Description
Use the dot1x dhcp-launch command to specify an 802.1x-enabled switch to launch
the process to authenticate a supplicant system when the supplicant system applies for
a dynamic IP address through DHCP.
Use the undo dot1x dhcp-launch command to disable an 802.1x-enabled switch from
authenticating a supplicant system when the supplicant system applies for a dynamic
IP address through DHCP.
By default, an 802.1x-enabled switch does not authenticate a supplicant system when
the latter applies for a dynamic IP address through DHCP.
Related command: display dot1x.
Example
# Configure to authenticate a supplicant system when it applies for a dynamic IP
address through DHCP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x dhcp-launch

1.1.5 dot1x guest-vlan

Syntax
dot1x guest-vlan vlan-id [ interface interface-list ]
undo dot1x guest-vlan [ interface interface-list ]
View
System view, Ethernet port view
Parameter
vlan-id: VLAN ID of a Guest VLAN, in the range 1 to 4094.
interface-list: Ethernet port list, in the form of interface-list= { interface-type
interface-number [ to interface-type interface-number ] } &<1-10>, in which
interface-type specifies the type of an Ethernet port and interface-number is the
number of the port. The string "&<1-10>" means that up to 10 port lists can be provided.
Description
Use the dot1x guest-vlan command to enable the Guest VLAN function for ports.
Use the undo dot1x guest-vlan command to disable the Guest VLAN function for
ports.
After 802.1x and guest VLAN are properly configured on a port:
Chapter 1 802.1x Configuration Commands
1-8