Display Mac-Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – VLAN
H3C S3100 Series Ethernet Switches
---------------------------------------
Ethernet1/0/1

1.3.2 display mac-vlan

Syntax
display mac-vlan { all | dynamic | static | vlan vlan-id }
View
Any view
Parameters
all: Displays all the MAC-to-VLAN mappings.
dynamic: Displays dynamically created MAC-to-VLAN mappings.
static: Displays statically configured MAC-to-VLAN mappings.
vlan vlan-id: Specify the VLAN ID for which the MAC-to-VLAN mapping is to be
displayed.
Description
Use the display mac-vlan command to display MAC-to-VLAN mappings.
Examples
# Display all the MAC-to-VLAN mappings.
<Sysname> display mac-vlan all
The following MAC-VLAN addresses exist:
S: Static
MAC ADDR
-------------------------------------------------------------------
0002-0001-0000
Total MAC-VLAN address count:1
Table 1-3 Description on the fields of the display mac-vlan command
Field
MAC ADDR
MASK
VLAN ID
PRIO
Ethernet1/0/2
D: Dynamic
MASK
ffff-ffff-ffff
MAC address in a MAC-to-VLAN mapping
Mask of the MAC address
VLAN ID mapped to the MAC address
802.1p priority assigned to the MAC address
1-18
Chapter 1 VLAN Configuration Commands
Ethernet1/0/3
VLAN ID
5
Description
PRIO STATE
3 S