Ntp-Service Authentication Enable; Ntp-Service Authentication-Keyid - H3C S3100 Series Command Manual

Command Manual (For Soliton) – NTP
H3C S3100 Series Ethernet Switches

1.1.5 ntp-service authentication enable

Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Parameter
None
Description
Use the ntp-service authentication enable command to enable the NTP
authentication.
Use the undo ntp-service authentication enable command to disable the NTP
authentication.
By default, the NTP authentication is disabled.
Refer to
authentication-keyid commands for related configuration.
Example
# Enable the NTP authentication.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ntp-service authentication enable

1.1.6 ntp-service authentication-keyid

Syntax
ntp-service authentication-keyid key-id authentication-mode md5 value
undo ntp-service authentication-keyid key-id
View
System view
Parameter
key-id: Authentication key ID, in the range of 1 to 4294967295.
value: Authentication key, a string comprising 1 to 32 characters. Up to 1024 keys can
be configured.
the ntp-service reliable
Chapter 1 NTP Configuration Commands
authentication-keyid
1-7
and ntp-service