Dhcp-Snooping Information Packet-Format - H3C S3100 Series Command Manual

Command Manual (For Soliton) – DHCP
H3C S3100 Series Ethernet Switches
Description
Use the dhcp-snooping information format command to configure the storage
format of non-user-defined Option 82 as HEX or ASCII.
By default, the Option 82 is in HEX format.
Note:
The dhcp-snooping information format command applies only to the default content
of the Option 82 field. If you have configured the circuit ID or remote ID sub-option, the
storage format of the sub-option is ASCII, instead of the one specified with the
dhcp-snooping information format command.
Examples
# Configure the storage format of Option 82 as ASCII.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dhcp-snooping information format ascii

1.1.4 dhcp-snooping information packet-format

Syntax
dhcp-snooping information packet-format { extended | standard }
View
System view
Parameters
extended: Specifies the padding format for Option 82 as the extended format.
standard: Specifies the padding format for Option 82 as the standard format.
Description
Use the dhcp-snooping information packet-format command to configure the
padding format for Option 82 as the extended or standard one.
By default, the padding format for Option 82 is the extended one.
Examples
# Configure the padding format for Option 82 as the standard one.
<Sysname> system-view
Chapter 1 DHCP Snooping Configuration Commands
1-3