Display Hwtacacs - H3C S3100 Series Command Manual

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Related commands: display hwtacacs.
Examples
# Specify to measure data and packets in data flows to TACACS servers in kilo-bytes
and kilo-packets respectively in HWTACACS scheme hwt1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname- hwtacacs-hwt1] data-flow-format data kilo-byte
[Sysname- hwtacacs-hwt1] data-flow-format packet kilo-packet

1.3.2 display hwtacacs

Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]
View
Any view
Parameters
hwtacacs-scheme-name: HWTACACS scheme name, a string of 1 to 32 characters.
This name is case-insensitive. If this argument is not specified, the system displays
information about all HWTACACS schemes.
statistics: Displays statistics about one or all HWTACACS schemes.
Description
Use the display hwtacacs command to display configuration or statistics information
of one specified or all HWTACACS schemes.
Related commands: hwtacacs scheme.
Examples
# Display configuration information of HWTACACS scheme ht1.
<Sysname> display hwtacacs ht1
--------------------------------------------------------------------
HWTACACS-server template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server
Secondary-accounting-server
Chapter 1 AAA Configuration Commands
: ht1
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
1-67