Display Ntp-Service Status - H3C S3100 Series Command Manual

Command Manual (For Soliton) – NTP
H3C S3100 Series Ethernet Switches
Field
Total
associations
Caution:
An S3100 series switch does not establish a session with its client when it works in the
NTP server mode, but does so when it works in other NTP implementation modes.

1.1.2 display ntp-service status

Syntax
display ntp-service status
View
Any view
Parameter
None
Description
Use the display ntp-service status command to display the status of NTP services.
Example
# View the status of the NTP service of the local switch.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 4
Reference clock ID: 1.1.1.11
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.8174 ms
Root delay: 37.86 ms
Root dispersion: 45.98 ms
Peer dispersion: 35.78 ms
Reference time: 16:30:46.078 UTC Mar 29 2007(C9689FB6.1431593E)
Total number of associations
1-3
Chapter 1 NTP Configuration Commands
Description