H3C S3100 Series Command Manual page 956

Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Table 1-3 Description on the fields of the display hwping history command
Response
Status
LastRC
Time
# Display the result of the test group with the administrator name being administrator,
and the operation tag being http.
[Sysname-hwping-administrator-http] display hwping results administrator
http
HWPing entry(admin administrator, tag http) test result:
Destination ip address:192.168.0.152
Send operation times: 10
Min/Max/Average Round Trip Time: 47/87/74
Square-Sum of Round Trip Time: 57044
Last succeeded test time: 2000-4-2 20:41:50.4
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Field
Roundtrip time in the case of a successful test,
timeout time in the case of test timeout, or 0 in the
case of a test failure (in milliseconds)
Test result values, including:
1: responseReceived: Response received
2: unknown: Unknown error.
3: internalError: System internal error
4: requestTimeOut: Request timed out
5: unknownDestinationAddress: Unknown
destination address
6: noRouteToTarget: Destination unreachable
7: interfaceInactiveToTarget: Interface to destination
address inactive
8: arpFailure: ARP operation failed.
9: maxConcurrentLimitReached: Maximum limit of
concurrent accesses reached
10: unableToResolveDnsName: Unable to resolve
DNS domain name
11: invalidHostAddress: Invalid host address
Response code in the last ICMP response packet
received. (The device does not support this field at
present, so that this field is always displayed as 0)
Test completion time
Description
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
1-7
Chapter 1 HWPing Commands