Table of Contents
Advertisement
Configuring the management IP address of the
switch module
Obtaining and planning related data
Before configuring the management IP address of the switch module, obtain and plan the related
data, as described in
Table 15 Related data
Data
Required Data
Management IP address of the OM module
User name and password used to log in to
the OM module
Switch module slot
Planned Data
Data planned for the switch module
•
The default settings refer to settings in the factory defaults.
•
The data in the table is for illustration only. The actual data during on-site operations shall prevail.
Configuration methods
You can configure the management IP address of the switch module in the following modes:
•
Configure the management IP address of the switch module through the web UI of the OM
module. For details, see
•
Configure the management IP address of the switch module through the CLI of the OM module.
For details, see
•
Configure the management IP address of the switch module through the CLI of the switch
module. For details, see
CLI."
Configuring the management IP address through OM Web
interface
Prerequisites
Before configuring the management IP address of the switch module through the OM module,
ensure that the following tasks are completed:
•
Power on the switch module. For more information, see
•
Log in to the web UI of the OM module. For more information, see
interface."
Table
15.
"Configuring the management IP address through OM Web
"Configuring the management IP address through the CLI of the OM
"Configuring the management IP address through the switch module
Example
•
Management IP address (default): 192.168.100.100
•
Subnet mask (default): 255.255.255.0
•
User name (default): admin
•
Password (default): Password@_
•
Slot number: 1
•
IP address: 192.168.200.1
•
Subnet mask: 255.255.255.0
•
Gateway: 192.168.200.254
"Powering on the switch
3
interface."
module."
module."
"Logging in to the OM Web
Advertisement
Table of Contents
