H3C S3100 Series Command Manual page 710

Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
View
Any view
Parameters
engineid: Engine ID, a string of 10 to 64 hexadecimal digits.
user-name: SNMPv3 username, a string of 1 to 32 characters.
group-name: Name of an SNMP group, a string of 1 to 32 characters.
Description
Use the display snmp-agent usm-user command to display the information about a
specific type of SNMPv3 users.
If you execute this command with no keyword specified, the information about all the
SNMPv3 users is displayed, including username, group name, engine ID, storage type
and user status.
SNMPv3 introduced the concepts of username and group. You can set the
authentication and privacy functions. The former is used to authenticate the validity of
the sending end of the packets, preventing access of illegal users; the latter is used to
encrypt packets between the NMS and agent, preventing the packets from being
intercepted. A more secure communication between SNMP NMS and SNMP agent can
be ensured by configuring whether to perform authentication and privacy or not.
You can configure whether to perform authentication and privacy when you create an
SNMPv3 group, and configure the specific algorithms and passwords for authentication
and privacy when you create a user.
Examples
# Display the information about all the SNMP users.
<Sysname> display snmp-agent usm-user
User name: usm-user
Group name: usm-group9-0
Engine ID: 800007DB000FE20F12346877
Storage-type: nonVolatile
UserStatus: active
Table 1-4 display snmp-agent usm-user command output description
Field
User name
Group name
Engine ID
SNMP username
The name of the SNMP group which the SNMP user belongs to
SNMP engine ID of the device
1-11
Chapter 1 SNMP Configuration Commands
Description