Ftp Server Enable - H3C S3100 Series Command Manual

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Note:
With an H3C S3100 series Ethernet switch acting as the FTP server, if you attempt to
disconnect a user that is uploading/downloading data to/from the FTP server, the
S3100 Ethernet switch will disconnect the user after the data transmission is
completed.
Related commands: display ftp-user.
Examples
# Display the current online FTP users.
<Sysname> display ftp-user
UserName
admin
# Disconnect the user named admin from the FTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftp disconnect admin
% The user connection will be disconnected after the data transfer finished
[Sysname]
%Apr 2 01:06:14:915 2000 Sysname FTPS/5/USEROUT:- 1 -User admin(192.168.0.152)
logged out

1.1.4 ftp server enable

Syntax
ftp server enable
undo ftp server
View
System view
Parameters
None
Description
Use the ftp server enable command to enable the FTP server function of the switch.
Use the undo ftp server command to disable the FTP server function of the switch.
HostIP Port
192.168.0.152 1029
1-4
Chapter 1 FTP and SFTP Configuration
Idle HomeDir
0
Commands
flash: