H3C S3100 Series Command Manual page 50

Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
privacy: Encrypts packets.
des56: Specifies data encryption standard (DES) for encrypting.
aes128: Specifies advanced encryption standard (AES) for encrypting.
priv-password: Encryption password, a string of 1 to 64 characters in plain text, a 32-bit
hexadecimal number in cipher text if MD5 algorithm is used, and a 40-bit hexadecimal
number in cipher text if SHA algorithm is used.
acl-number: Basic ACL number, ranging from 2000 to 2999.
local: Specifies local entity users.
engineid-string: Engine ID associated with the user, a string of even number of
hexadecimal numbers and comprising of 10 to 64 hexadecimal digits.
Description
Use the snmp-agent usm-user command to add a user to an SNMP group. You can
also optionally use this command to apply an ACL for network management users.
Use the undo snmp-agent usm-user command to remove an SNMP user from the
corresponding SNMP group and to remove the ACL configuration on the user.
Examples
# Add a user named aaa to an SNMP group named group1, specify to require
authentication,
authentication password as 123, and apply ACL 2002 to filter network management
users (assuming that ACL 2002 already exists).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent usm-user v3 aaa group1 authentication-mode md5 123 acl
2002
specify the authentication
2-6
Chapter 2 Commands for User Control
protocol as HMAC-MD5-96 and