Display Qos-Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Parameter
group-id: Port group ID, in the range 1 to 100. If this argument is not specified, the QoS
information of all the port groups is displayed.
all: Displays all the QoS-related configurations of a port group.
traffic-limit: Displays the traffic policing configuration of a port group.
traffic-priority: Displays the priority marking configuration of a port group.
traffic-redirect: Displays the traffic redirecting configuration of a port group.
traffic-statistics: Displays the traffic accounting configuration of a port group.
Description
Use the display qos-port-group command to display specific QoS-related
configuration of a port group.
Example
# Display all the QoS-related configurations of port group 1.
<Sysname> display qos-port-group 1 all
Port-group 1 traffic-limit
Inbound:
Matches: Acl 3001 rule 0
Target rate: 128 Kbps
Exceed action: drop
meter-statistic not running
Refer to

1.1.15 display qos-vlan

Syntax
display qos-vlan [ vlan-id ] { all | mirrored-to | traffic-limit | traffic-priority |
traffic-redirect | traffic-statistic }
View
Any view
Parameter
vlan-id: VLAN ID, in the range 1 to 4094. If this argument is not specified, the QoS
configuration performed for all the VLANs is displayed.
all: Displays all the QoS-related configurations performed for packets of a VLAN.
traffic-limit: Displays the traffic policing configuration performed for packets of a
VLAN.
Table 1-1 for the description on the output fields.
running
1-14
Chapter 1 QoS Commands