Mirrored-To Vlan - H3C S3100 Series Command Manual

Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Inbound:
Matches: Acl 2000 rule 1
Mirrored to: monitor interface

1.1.19 mirrored-to vlan

Syntax
mirrored-to vlan vlan-id inbound acl-rule { cpu | monitor-interface }
undo mirrored-to inbound acl-rule
View
System view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
inbound: Mirrors the inbound packets.
acl-rule: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
that the ACL rules referenced must be those defined with the permit keyword specified.
cpu: Duplicates the packets to the CPU.
monitor-interface: Duplicates the packets to the destination mirroring port.
Description
Use the mirrored-to vlan command to reference ACLs to a VLAN for identifying traffics
and perform traffic mirroring for packets that match.
Use the undo mirrored-to vlan command to remove traffic mirroring configuration for
a VLAN.
Note that, the same ACL cannot be simultaneously referenced in both traffic mirroring
configuration and traffic redirecting configuration for a VLAN.
Note:
The traffic mirroring function configured on a VLAN is only applicable to packets tagged
with 802.1Q header.
Related command: display qos-vlan, monitor-port.
running
1-19
Chapter 1 QoS Commands
Table 1-8 and Table 1-9. Note