H3C S3100 Series Command Manual page 362

Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Ethernet1/0/2
......
Table 1-1 Description on the fields of the display dot1x command
Equipment 802.1X protocol is
enabled
CHAP authentication is
enabled
DHCP-launch is disabled
Handshake is enabled
Proxy trap checker is disabled
Proxy logoff checker is
disabled
EAD Quick Deploy is enabled
Transmit Period
Handshake Period
ReAuth Period
ReAuth MaxTimes
Quiet Period
Quiet Period Timer is disabled
Supp Timeout
Server Timeout
Field
802.1x protocol (802.1x for short) is enabled on the
switch.
CHAP authentication is enabled.
DHCP-triggered. 802.1x authentication is disabled.
The online user handshaking function is enabled.
Whether or not to send Trap packets when
detecting a supplicant system logs in through a
proxy.
Whether or not to disconnect a supplicant system
when detecting it logs in through a proxy.
Quick EAD deployment is enabled.
Setting of the Transmission period timer (the
tx-period)
Setting of the handshake period timer (the
handshake-period)
Re-authentication interval
Maximum times of re-authentications
Setting of the quiet period timer (the quiet-period)
The quiet period timer is disabled here. It can also
be configured as enabled when necessary.
Setting of the supplicant timeout timer
(supp-timeout)
Setting of the server-timeout timer (server-timeout)
1-3
Chapter 1 802.1x Configuration Commands
Description
Disable means the switch does not send Trap
packets when it detects that a supplicant system
logs in through a proxy.
Enable means the switch sends Trap packets
when it detects that a supplicant system logs in
through a proxy.
Disable means the switch does not disconnect a
supplicant system when it detects that the latter
logs in through a proxy.
Enable means the switch disconnects a
supplicant system when it detects that the latter
logs in through a proxy.