H3C S3100 Series Command Manual page 804

Command Manual ( For Soliton ) – SSH
H3C S3100 Series Ethernet Switches
password-publickey: Specifies the authentication mode for the SSH user as
password and publickey.
publickey: Specifies the authentication mode for the SSH user as publickey (RSA key
or DSA key ) authentication.
rsa: Specifies the authentication mode for the SSH user as publickey (RSA key or DSA
key ) authentication. The authentication modes specified by the rsa keyword and
publickey keyword are implemented in the same way
Note:
For the password-publickey authentication type:
SSH1 client users can access the switch as long as they pass one of the two
authentications.
SSH2 client users can access the switch only when they pass both the
authentications.
Description
Use the ssh user authentication-type command to specify the authentication mode
for SSH users on the server.
Use the undo ssh user authentication-type command to remove the configuration.
Caution:
You need to specify the authentication mode for an SSH user. Otherwise, the user will
not be able to log in to the SSH server.
Related commands: display ssh user-information.
Examples
# Specify the publickey authentication for SSH users.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname]ssh user kk authentication-type publickey
# Display SSH user information.
[Sysname] display ssh user-information
Username Authentication-type
1-36
Chapter 1 SSH Commands
User-public-key-name Service-type