H3C S3100 Series Command Manual page 811

Command Manual (For Soliton) – File System Management
H3C S3100 Series Ethernet Switches
Copy unit1>flash:/config.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
...
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/1.cfg...Done.
# Copy file config.cfg from the root directory to directory test, and save the file using
the original file name.
<Sysname> copy flash:/config.cfg flash:/test
Copy unit1>flash:/config.cfg to unit1>flash:/test/config.cfg?[Y/N]:y
...
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/config.cfg...Done.
1.1.3 delete
Syntax
delete [ /unreserved ] file-url
delete { running-files | standby-files } [ /unreserved ]
View
User view
Parameter
/unreserved: Specifies to delete a file completely.
file-url: Path name or file name of a file in the Flash memory. You can use the *
character in this argument as a wildcard. For example, the delete *.txt command
deletes all the files with txt as their extensions.
running-files: Specifies to delete all the files with the main attribute.
standby-files: Specifies to delete all the files with the backup attribute.
Description
Use the delete command to delete a specified file from the Flash memory on a switch.
If you execute the delete command with the /unreserved keyword specified, the
specified file is permanently deleted. That is, the file cannot be restored. If you execute
the delete command without the /unreserved keyword, the specified file is removed to
the recycle bin, and you can use the undelete command to restore it.
You can delete files based on file attribute.
If you execute the delete running-files command, all the files with the main
attribute will be deleted.
If you execute the delete standby-files command, all the files with the backup
attribute will be deleted.
For a file that has both the main and backup attributes:
Chapter 1 File System Management
1-3
Configuration Commands