Super Password - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
Super: The Super authentication mode of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
S : Authentication use super password.
Table 1-1 Descriptions on the fields of the display user-interface command
Filed
+
F
Idx
Type
Tx/Rx
Modem
Privi
Auth
Int
Super
A
N
P
S
# Display the summary information about the user interface.
<Sysname> display user-interface summary
User interface type : [AUX]
User interface type : [VTY]
The user interface is in use.
The user interface operates in asynchronous mode.
The absolute index of the user interface
User interface type and the relative index
Transmission speed of the user interface
Indicates whether or not a modem is used.
Available command level
Authentication mode
Physical position of the user interface
The authentication mode used for a user to switch from the current
lower user level to a higher level, including S, A, SA and AS.
S: Super password authentication
A: HWTACACS authentication
SA: Super password authentication is preferred, with HWTACACS
authentication being a backup
AS: HWTACACS authentication is preferred, with super password
authentication being a backup
For details about the four authentication modes, refer to the CLI part
of the manual.
The current user authentication mode is scheme.
The current user authentication mode is none.
The current user authentication mode is password.
Super password authentication
0:UXXX XXXX
1-7
Chapter 1 Login Commands
Description