Display Ntdp Device-List - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches

2.2.2 display ntdp device-list

Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of devices in a cluster.
Description
Use the display ntdp device-list command to display the cluster device information
collected by NTDP.
Examples
# Display the list of devices collected by NTDP.
<Sysname> display ntdp device-list
MAC
000f-e20f-3901
000f-e20f-3190
Table 2-3 Description on the fields of the display ntdp device-list command
Field
MAC
HOP
IP
PLATFORM
# Display detailed device information collected by NTDP.
[1234_0.Sysname]display ntdp device-list verbose
Hostname
MAC
Hop
Platform
IP
Version
H3C Comware Platform Software
Comware Software, Version 3.10
HOP IP
0 100.100.1.1/24
1 16.1.1.1/24
MAC address of a device collected by NTDP
Hops from this device to the collected device
IP address and mask length of the management VLAN interface
on the collected device
Platform information about the collected device
: 1234_0.Sysname
: 00e0-fc11-1111
: 0
: S3100
: 192.168.0.234/24
:
Chapter 2 HGMP V2 Configuration
PLATFORM
S3100
S3100
Description
2-8
Commands