H3C S3100 Series Command Manual page 833

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Table 1-1 display ftp-server command output description
FTP server is running
Max user number
User count
Timeout value (in minute)
Note:
The H3C S3100 series Ethernet switch supports one user access at one time when it
serves as the FTP server.
1.1.2 display ftp-user
Syntax
display ftp-user
View
Any view
Parameters
None
Description
Use the display ftp-user command to display the information of the FTP users that
have logged in to the switch, including the user name, host IP address, port number,
idle timeout time, and authorized directory.
Note:
For how to create an FTP user on an FTP server, refer to the AAA part of this manual.
Field
1
0
30
1-2
Chapter 1 FTP and SFTP Configuration
Description
The FTP server is started. If the FTP server is
not started, "% FTP server has been stopped"
will be displayed, and the three fields below will
not be displayed.
The FTP server can accommodate up to one
user.
The current login user number is 0.
The connection idle time is 30 minutes.
Commands