Display Cluster Members - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Hop
Platform
IP
Table 2-7 Description on the fields of display cluster candidates verbose
Field
Hostname
MAC
Hop
IP
Platform

2.3.13 display cluster members

Syntax
display cluster members [ member-number | verbose ]
View
Any view
Parameters
member-number: Member number of a device, ranging from 0 to 255.
verbose: Displays detailed information about all the devices in a cluster.
Description
Use the display cluster members command to display information about one specific
or all devices in a cluster.
This command is only applicable to a management device.
Examples
# Display information about all devices in a cluster.
<aaa_0.Sysname-cluster> display cluster members
SN Device
0 S3100
1 S3100
2 S3100
: 1
: S3100
: 16.1.1.1/24
Name of the candidate device
MAC address of the candidate device
Hops from the management device to the candidate device
IP address of the candidate device
Platform of the candidate device
MAC Address
000f-e20f-3901
3900-0000-3334
000f-e20f-3190
Chapter 2 HGMP V2 Configuration
Description
Status Name
Admin aaa_0.Sysname
Up aaa_1.Sysname
Up aaa_2.3100-3
2-31
Commands