Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Latest sampled values
dropevents
octets
packets
broadcastpackets
multicastpackets
CRC alignment errors
undersize packets
oversize packets
fragments
jabbers
collisions
utilization
2.1.5 display rmon prialarm
Syntax
display rmon prialarm [ prialarm-entry-number ]
View
Any view
Parameters
prialarm-entry-number: Extended alarm entry Index, in the range 1 to 65,535.
Description
Use the display rmon prialarm command to display the configuration of an RMON
extended alarm entry. If you do not specify the prialarm-entry-number argument, the
configuration of all the extended alarm entries is displayed.
The information in an extended alarm entry includes: sampling type, variable formula of
the sampled node, sampling interval, rising and falling thresholds that trigger an alarm,
the condition under which an alarm is triggered, and the last sampled value.
Related commands: rmon prialarm.
Field
Latest sampled values
Number of the packet-dropping events
Number of the received/transmitted bytes during
sampling duration
Number of the received/transmitted packets during
sampling duration
Number of the broadcast packets
Number of the multicast packets
Number of the packet with CRC errors
Number of the undersize packets
Number of the oversize packets
Number of the undersize packets with CRC errors
Number of the oversize packets with CRC errors
Number of the packets that cause collisions
Bandwidth utilization
Chapter 2 RMON Configuration Commands
Description
2-6