Display Memory - H3C S3100 Series Command Manual

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
AddrLM
Type
State

3.1.6 display memory

Syntax
display memory [ unit unit-id ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
Description
Use the display memory command to display the memory usage of a specified switch.
Example
# Display the memory usage of this switch.
<Sysname> display memory
Unit 1
System Available Memory(bytes): 28486656
System Used Memory(bytes): 13180084
Used Rate: 46%
Table 3-4 Description for the fields of the display memory command
System Available
Memory(bytes)
System Used
Memory(bytes)
Used Rate
Field
Field
Available memory size of the system, in unit of bytes
Used memory size of the system, in unit of bytes
Percentage of the used memory
Description
MAC address learning mode
Card type
Running state
Description
3-5
Chapter 3 Device Management
Commands