Mac-Address Multicast Interface - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Multicast
H3C S3100 Series Ethernet Switches
The information above shows that multicast source port suppression is disabled on
Ethernet 1/0/1.

2.1.3 mac-address multicast interface

Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]
View
System view
Parameters
mac-address: Multicast MAC address, in the form of H-H-H.
interface interface-list: Specifies forwarding ports for the specified multicast MAC
group address. With the interface-list argument, you can define one or more individual
ports (in the form of interface-type interface-number) and/or one or more port ranges (in
the form of interface-type interface-number1 to interface-type interface-number2,
where interface-number2 must be greater than interface-number1). The total number of
individual ports plus port ranges cannot exceed 10. For port types and port numbers,
refer to the parameter description in the "Port Basic Configuration" part in this manual.
vlan vlan-id: Specifies the VLAN to which the forwarding ports belong. The effective
range for vlan-id is 1 to 4094.
Description
Use the mac-address multicast interface command to create a multicast MAC
address entry.
Use the undo mac-address multicast interface command to remove the specified
multicast MAC address entry or all multicast MAC address entries.
Each multicast MAC address entry contains multicast address, forward port, VLAN ID,
and so on.
Related commands: display mac-address multicast static.
Examples
# Create a multicast MAC address entry, with the multicast MAC address of
0100-5e0a-0805 and a forwarding port of Ethernet 1/0/1 in VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-address multicast 0100-5e0a-0805 interface Ethernet 1/0/1 vlan
1
Chapter 2 Common Multicast Configuration
2-3
Commands