H3C S3100 Series Command Manual page 926

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Digital Diagnostic Monitoring
Vendor Name
Ordering Name
Table 3-8 Description on the fields of the display transceiver interface command
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic
Monitoring
Vendor Name
Ordering Name
Field
Transceiver information of the interface
Transceiver type
Type of the connectors of the transceiver:
Transfer distance, with xx representing km for
single-mode transceivers and m for other transceivers.
If the transceiver supports multiple transfer medium,
every two values of the transfer distance are separated
by a comma. The corresponding transfer medium is
included in the bracket following the transfer distance
value. The following are the transfer media:
Whether the digital diagnosis function is supported,
where:
Vendor name or vendor name specified of the
transceiver:
Ordering name of the transceiver
: YES
: H3C
: SFP-GE-LX10-SM1310
Description
Optical connectors, including SC (SC connector,
developed by NTT) and LC (LC connector, 1.25
mm/RJ45 optical connector developed by Lucent).
Other connectors, including RJ-45 and CX4.
Optical transceiver: central wavelength of the laser
sent, in nm. If the transceiver supports multiple
wavelengths, every two wavelength values are
separated by a comma.
Electrical transceiver: displayed as N/A.
9 um: 9/125 um single-mode fiber
50 um: 50/125 um multi-mode fiber
62.5 um: 62.5/125 um multi-mode fiber
TP: Twisted pair
CX4: CX4 cable
YES: supported
NO: not supported
The anti-spoofing transceiver customized by H3C:
H3C is displayed.
Other transceivers: The original vendor name is
displayed.
3-12
Chapter 3 Device Management
Commands