H3C S3100 Series Command Manual page 697

Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Note:
This command is applicable to only the management device of a cluster.
Related commands: topology restore-from.
Examples
# Enter Cluster view.
<aaa_0.Sysname>system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster]
# Save the standard topology of the cluster to the local Flash.
[aaa_0.Sysname-cluster] topology save-to local-flash
Base topology backup to file OK
Chapter 2 HGMP V2 Configuration
2-55
Commands