Chapter 1 Port Isolation Configuration Commands; Display Isolate Port; Port Isolate - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Port Isolation
H3C S3100 Series Ethernet Switches

Chapter 1 Port Isolation Configuration Commands

1.1 Port Isolation Configuration Commands

1.1.1 display isolate port

Syntax
display isolate port
View
Any view
Parameter
None
Description
Use the display isolate port command to display the Ethernet ports assigned to the
isolation group.
Example
# Display information about the Ethernet ports added to the isolation group.
<Sysname> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3, Ethernet1/0/4
The information above shows that Ethernet1/0/2, Ethernet1/0/3, and Ethernet1/04 are
in the isolation group.

1.1.2 port isolate

Syntax
port isolate
undo port isolate
View
Ethernet port view
Parameter
None
Chapter 1 Port Isolation Configuration
1-1
Commands