Display Link-Aggregation Summary - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Link Aggregation
H3C S3100 Series Ethernet Switches
Received LACP Packets: 0 packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Table 1-1 Description on the fields of the display link-aggregation interface
command
Selected AggID
Local
Port-Priority
Oper key
Flag
Remote
System ID
Port number
Received LACP Packets: 0 packet(s),
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)

1.1.2 display link-aggregation summary

Syntax
display link-aggregation summary
View
Any view
Parameter
None
Description
Use the display link-aggregation summary command to display summary
information of all aggregation groups.
Note that as ports in a manual link aggregation groups do not acquire the information
about their peers automatically, so the entries in the information about the peer ports
displayed are all 0 instead of the actual values.
Example
# Display summary information of all aggregation groups.
Field
1-2
Chapter 1 Link Aggregation Configuration
Description
ID of the aggregation group to which the
specified port belongs
Information about the local end
Port priority
Operation key
Protocol status flag
Information about the remote end
Remote device ID
Port number
Statistics about received, invalid, and
sent LACP packets
Commands