Display Channel; Information Center Configuration Commands; Display Info-Center - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration

1.1 Information Center Configuration Commands

1.1.1 display channel

Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn)
console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7,
channel8, channel9.
Description
Use the display channel command to display the settings of an information channel.
If no argument is specified in the command, the settings of all channels are displayed.
Example
# Display the settings of information channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME
ffff0000 default

1.1.2 display info-center

Syntax
display info-center [ unit unit-id ]
View
Any view
Commands
ENABLE LOG_LEVEL
Y warning
1-1
Chapter 1 Information Center Configuration
ENABLE TRAP_LEVEL
Y debugging
Commands
ENABLE DEBUG_LEVEL
Y debugging