H3C S3100 Series Operation Manual
H3C S3100 Series Operation Manual

H3C S3100 Series Operation Manual

Ethernet switches
Hide thumbs Also See for S3100 Series:

Advertisement

Quick Links

Operation Manual (For Soliton) - System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 1 Boot ROM and Host Software Loading ..................................................................... 1-1
1.1 Introduction to Loading Approaches .................................................................................. 1-1
1.2 Local Boot ROM and Software Loading ............................................................................ 1-1
1.2.1 BOOT Menu ............................................................................................................ 1-2
1.2.2 Loading by XModem through Console Port ............................................................ 1-3
1.2.3 Loading by TFTP through Ethernet Port ................................................................. 1-8
1.2.4 Loading by FTP through Ethernet Port ................................................................. 1-10
1.3 Remote Boot ROM and Software Loading ...................................................................... 1-12
1.3.1 Remote Loading Using FTP.................................................................................. 1-12
1.3.2 Remote Loading Using TFTP................................................................................ 1-17
Chapter 2 Basic System Configuration and Debugging ........................................................... 2-1
2.1 Basic System Configuration............................................................................................... 2-1
2.2 Displaying the System Status ............................................................................................ 2-2
2.3 Debugging the System ...................................................................................................... 2-2
2.3.1 Enabling/Disabling System Debugging................................................................... 2-2
2.3.2 Displaying Debugging Status .................................................................................. 2-4
Chapter 3 Network Connectivity Test.......................................................................................... 3-1
3.1 Network Connectivity Test ................................................................................................. 3-1
3.1.1 ping.......................................................................................................................... 3-1
3.1.2 tracert ...................................................................................................................... 3-1
Chapter 4 Device Management .................................................................................................... 4-1
4.1 Introduction to Device Management .................................................................................. 4-1
4.2 Device Management Configuration ................................................................................... 4-1
4.2.1 Device Management Configuration Tasks .............................................................. 4-1
4.2.2 Rebooting the Ethernet Switch................................................................................ 4-1
4.2.3 Scheduling a Reboot on the Switch ........................................................................ 4-2
4.2.5 Specifying the APP to be Used at Reboot .............................................................. 4-3
4.2.6 Upgrading the Boot ROM........................................................................................ 4-3
4.2.7 Identifying and Diagnosing Pluggable Transceivers ............................................... 4-3
4.3 Displaying the Device Management Configuration............................................................ 4-5
4.4 Remote Switch APP Upgrade Configuration Example ...................................................... 4-6

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading

Summary of Contents for H3C S3100 Series

  • Page 1: Table Of Contents

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Table of Contents Table of Contents Chapter 1 Boot ROM and Host Software Loading ..............1-1 1.1 Introduction to Loading Approaches .................. 1-1 1.2 Local Boot ROM and Software Loading ................1-1 1.2.1 BOOT Menu ......................
  • Page 2: Chapter 1 Boot Rom And Host Software Loading

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Chapter 1 Boot ROM and Host Software Loading Traditionally, switch software is loaded through a serial port. This approach is slow, time-consuming and cannot be used for remote loading.
  • Page 3: Boot Menu

    Boot ROM loading process. 1.2.1 BOOT Menu Starting..*********************************************************** H3C S3100-26TP-EI-W BOOTROM, Version 506 *********************************************************** Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd. Creation date : Apr 17 2007, 10:12:36 CPU Clock Speed : 200MHz BUS Clock Speed : 33MHz Memory Size...
  • Page 4: Loading By Xmodem Through Console Port

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Enter the correct Boot ROM password (no password is set by default). The system enters the BOOT Menu:...
  • Page 5 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): Step 2: Press 3 in the above menu to download the Boot ROM using XModem. The...
  • Page 6 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Figure 1-1 Properties dialog box Figure 1-2 Console port configuration dialog box...
  • Page 7 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Step 5: Click the <Disconnect> button to disconnect the HyperTerminal from the switch and then click the <Connect> button to reconnect the HyperTerminal to the switch, as...
  • Page 8 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Figure 1-5 Sending file page Step 9: After the sending process completes, the system displays the following information: Loading ...CCCCCCCCCC done!
  • Page 9: Loading By Tftp Through Ethernet Port

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading 3. Set XMODEM protocol parameter 0. Return to boot menu Enter your choice(0-3): Step 2: Enter 3 in the above menu to load the host software by using XModem.
  • Page 10 Step 2: Run the TFTP server program on the TFTP server, and specify the path of the program to be downloaded. Caution: TFTP server program is not provided with the H3C Series Ethernet Switches. Step 3: Run the HyperTerminal program on the configuration PC. Start the switch. Then enter the BOOT Menu.
  • Page 11: Loading By Ftp Through Ethernet Port

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Step 1: Select <1> in BOOT Menu and press <Enter>. The system displays the following information: 1. Set TFTP protocol parameter 2.
  • Page 12 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Note: You can use one computer as both configuration device and FTP server. Step 2: Run the FTP server program on the FTP server, configure an FTP user name and password, and copy the program file to the specified FTP directory.
  • Page 13: Remote Boot Rom And Software Loading

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Enter your choice(0-3): Enter 2 in the above menu to download the host software using FTP. The subsequent steps are the same as those for loading the Boot ROM, except for that the system gives the prompt for host software loading instead of Boot ROM loading.
  • Page 14 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Password: 230 Logged in successfully [ftp] get switch.btm [ftp] bye Note: When using different FTP server software on PC, different information will be output to the switch.
  • Page 15 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading II. Loading Procedure Using FTP Server As shown in Figure 1-9, the switch is used as the FTP server. You can telnet to the switch, and then execute the FTP commands to upload the Boot ROM switch.btm to the...
  • Page 16 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Figure 1-10 Command line interface Step 5: Use the cd command on the interface to enter the path that the Boot ROM upgrade file is to be stored.
  • Page 17 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading Figure 1-12 Log on to the FTP server Step 7: Use the put command to upload the file switch.btm to the switch, as shown in Figure 1-13.
  • Page 18: Remote Loading Using Tftp

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 1 Boot ROM and Host H3C S3100 Series Ethernet Switches Software Loading <Sysname> boot bootrom switch.btm This will update Bootrom on unit 1. Continue? [Y/N] y Upgrading Bootrom, please wait...
  • Page 19: Chapter 2 Basic System Configuration And Debugging

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 2 Basic System H3C S3100 Series Ethernet Switches Configuration and Debugging Chapter 2 Basic System Configuration and Debugging 2.1 Basic System Configuration Table 2-1 Basic System Configuration Operation Command Description...
  • Page 20: Displaying The System Status

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 2 Basic System H3C S3100 Series Ethernet Switches Configuration and Debugging Operation Command Description Optional Return from current The composite key <Ctrl+Z> has return view to user view the same effect with the return command.
  • Page 21 Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 2 Basic System H3C S3100 Series Ethernet Switches Configuration and Debugging Figure 2-1 The relationship between the protocol and screen debugging switch Note: Displaying debugging information on the terminal is the most commonly used way to output debugging information.
  • Page 22: Displaying Debugging Status

    Operation Manual (For Soliton) – System Maintenance and Debugging Chapter 2 Basic System H3C S3100 Series Ethernet Switches Configuration and Debugging 2.3.2 Displaying Debugging Status Table 2-4 Display the current debugging status in the system Operation Command Description Display all...
  • Page 23: Chapter 3 Network Connectivity Test

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 3 Network Connectivity Test Chapter 3 Network Connectivity Test 3.1 Network Connectivity Test 3.1.1 ping You can use the ping command to check the network connectivity and the reachability of a host.
  • Page 24 Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 3 Network Connectivity Test Table 3-2 The tracert command Operation Command Description View the gateways that a tracert [ -a source-ip ] [ -f You can execute the...
  • Page 25: Chapter 4 Device Management

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management Chapter 4 Device Management 4.1 Introduction to Device Management Device Management includes the following: Reboot the Ethernet switch Configure real-time monitoring of the running status of the system...
  • Page 26: Scheduling A Reboot On The Switch

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management Table 4-2 Reboot the Ethernet switch Operation Command Description Reboot the Ethernet switch reboot [ unit unit-id ] Available in user view 4.2.3 Scheduling a Reboot on the Switch...
  • Page 27: Specifying The App To Be Used At Reboot

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management Caution: Enabling of this function consumes some amounts of CPU resources. Therefore, if your network has a high CPU usage requirement, you can disable this function to release your CPU resources.
  • Page 28 Transceiver interfaces Package) Note: For pluggable transceivers supported by S3100 series Ethernet switches, refer to H3C S3100 Series Ethernet Switches Installation Manual(For Soliton). II. Identifying pluggable transceivers As pluggable transceivers are of various types and from different vendors, you can...
  • Page 29: Displaying The Device Management Configuration

    You can use the Vendor Name field in the prompt information of the display transceiver interface command to identify an anti-spoofing pluggable transceiver customized by H3C. If the field is H3C, it is considered an H3C-customized pluggable transceiver. Electrical label information is also called permanent configuration data or archive information, which is written to the storage device of a card during device debugging or test.
  • Page 30: Remote Switch App Upgrade Configuration Example

    Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management Table 4-10 Display the operating status of the device management Operation Command Description Display the APP to be adopted display boot-loader [ unit...
  • Page 31 Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management II. Network diagram Figure 4-1 Network diagram for FTP configuration III. Configuration procedure Configure the following FTP server–related parameters on the PC: an FTP user with the username as switch and password as hello, who is authorized with the read-write right on the directory Switch on the PC.
  • Page 32 Operation Manual (For Soliton) – System Maintenance and Debugging H3C S3100 Series Ethernet Switches Chapter 4 Device Management 331 Give me your password, please Password: 230 Logged in successfully [ftp] Enter the authorized path on the FTP server. [ftp] cd switch Execute the get command to download the switch.bin and boot.btm files on the...

Table of Contents