H3C S3100 Series Command Manual page 829

Command Manual (For Soliton) – File System Management
H3C S3100 Series Ethernet Switches
undo startup bootrom-access enable
View
User view
Parameter
None
Description
Use the startup bootrom-access enable command to specify a switch to prompt
users to use customized password to enter the BOOT menu.
Use the undo startup bootrom-access enable command to disable the above
function.
By default, users have to use customized passwords to enter the BOOT menu.
You can use the display startup command in the Configuration File Management part
of the manual to view the execution results of these two commands.
Example
# Specify to prompt users to use customized passwords to enter the BOOT menu.
<Sysname> startup bootrom-access enable
<Sysname> display startup
UNIT 1:
Current Startup saved-configuration file:
Next main startup saved-configuration file:
Next backup startup saved-configuration file:
Bootrom-access enable state:
Chapter 1 File System Management
1-21
Configuration Commands
flash:/config.cfg
flash:/config.cfg
NULL
enabled