Display Link-Delay; Display Loopback-Detection - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches

1.1.6 display link-delay

Syntax
display link-delay
View
Any view
Parameters
None
Description
Use the display link-delay command to display the information about the ports with
the link-delay command configured, including the port name and the configured delay.
Related commands: link-delay.
Examples
# Display the information about the ports with the link-delay command configured.
<Sysname> display link-delay
Interface
===================== ==============
Ethernet1/0/5

1.1.7 display loopback-detection

Syntax
display loopback-detection
View
Any view
Parameter
None
Description
Use the display loopback-detection command to display the loopback detection
status on the port. If loopback detection is enabled, this information will also be
displayed: time interval for loopback detection and the loopback ports.
Example
# Display the loopback detection status on the port.
Time Delay
8
1-13
Chapter 1 Port Basic Configuration
Commands