Display Queue-Scheduler - H3C S3100 Series Command Manual

Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
traffic-priority: Displays the priority marking configuration performed for packets of a
VLAN.
traffic-redirect: Displays the traffic redirecting configuration performed for packets of a
VLAN.
traffic-statistics: Displays the traffic accounting configuration performed for packets of
a VLAN.
Description
Use the display qos-vlan command to display the QoS-related configuration
performed for a VLAN.
Example
# Display all the QoS-related configuration performed for VLAN 1.
<Sysname> display qos-vlan 1 all
Vlan 1 traffic-limit
Inbound:
Matches: Acl 3001 rule 0
Target rate: 128 Kbps
Exceed action: drop
meter-statistic not running
Refer to

1.1.16 display queue-scheduler

Syntax
display queue-scheduler
View
Any view
Parameter
None
Description
Use the display queue-scheduler command to display the queue scheduling mode
and corresponding configuration.
Related command: queue-scheduler.
Example
# Display the queue scheduling mode and corresponding configuration.
<Sysname> display queue-scheduler
Table 1-1 for the description on the output fields.
running
1-15
Chapter 1 QoS Commands