Arp Static; Arp Restricted-Forwarding Enable - H3C S3100 Series Command Manual

Command Manual (For Soliton) – ARP
H3C S3100 Series Ethernet Switches

1.1.9 arp restricted-forwarding enable

Syntax
arp restricted-forwarding enable
undo arp restricted-forwarding enable
View
VLAN view
Parameters
None
Description
Use the arp restricted-forwarding enable command to enable ARP restricted
forwarding so that the legal ARP requests received from the specified VLAN are
forwarded through configured trusted ports only, and the legal ARP responses are
forwarded according to the MAC addresses in the packets, or through trusted ports if
the MAC address table contains no such destination MAC addresses.
Use the undo arp restricted-forwarding enable command to disable ARP restricted
forwarding.
By default, ARP restricted forwarding is disabled.
Related commands: arp detection enable, arp detection trust
Syntax
# Enable ARP restricted forwarding in VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 1
[Sysname-vlan1] arp restricted-forwarding enable

1.1.10 arp static

Syntax
arp static ip-address mac-address [ vlan-id interface-type interface-number ]
arp static ip-address mac-address vlan-id (in Ethernet port view)
undo arp ip-address
View
System view, Ethernet port view
Chapter 1 ARP Configuration Commands
1-7