Ssh User Service-Type - H3C S3100 Series Command Manual

Command Manual ( For Soliton ) – SSH
H3C S3100 Series Ethernet Switches
kk

1.1.32 ssh user service-type

Syntax
ssh user username service-type { stelnet | sftp | all }
undo ssh user username service-type
View
System view
Parameters
username: SSH user name, a string of 1 to 184 characters. It cannot contain any of
these characters: slash (/), backslash (\), colon (:), asterisk (*), question mark (?), less
than sign (<), greater than sign (>), and the vertical bar sign (|). In addition, the @ sign
can appear up to once, the username part (that is, the string before the @ sign) cannot
be more than 55 characters, and the domain name part cannot be more than 128
characters.
stelnet: Specifies that the user can access the secure Telnet service.
sftp: Specifies that the user can access the SFTP service.
all: Specifies that the user can access both services (secure Telnet and SFTP).
Description
Use the ssh user service-type command to configure service type for a user so that
the user can access specified service(s).
Use the undo ssh user service-type command to remove the service type specified
for an SSH user.
The default service type for an SSH user is stelnet.
Related commands: display ssh user-information.
Examples
# Specify that user kk can access SFTP service.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ssh user kk service-type sftp
# Display SSH user information.
[Sysname] display ssh user-information
Username
kk
publickey
Authentication-type
publickey
1-37
Chapter 1 SSH Commands
null
User-public-key-name
null
stelnet
Service-type
sftp