Voice Vlan Mac-Address - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Voice VLAN
H3C S3100 Series Ethernet Switches
View
Ethernet port view
Parameters
None
Description
Use the voice vlan legacy command to enable the voice VLAN legacy function. This
function realizes the communication between H3C device and other vendors' voice
device by automatically adding the voice VLAN tag to the voice data coming from other
vendors' voice device.
Use the undo voice vlan legacy command to disable the voice VLAN legacy function.
By default, the voice VLAN legacy function is disabled.
Examples
# Enable the voice VLAN legacy function on Ethernet1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] voice vlan legacy

1.1.9 voice vlan mac-address

Syntax
voice vlan mac-address oui mask oui-mask [ description text ]
undo voice vlan mac-address oui
View
System view
Parameters
oui: Specify a MAC address, in the format of H-H-H.
oui-mask: Specify a MAC address mask, made up of consecutive Fs and consecutive
0s. It specifies the matching length of the OUI address. When the switch receives a
packet, it matches the bits in the source MAC address corresponding to the Fs against
the OUI list.
text: Description of the MAC address, containing 1 to 30 characters.
Chapter 1 Voice VLAN Configuration
1-8
Commands