H3C S3100 Series Command Manual page 861

Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
If -a or -l is not specified, the command displays details about the files and folders in the
specified directory in a list.
If no remote path is specified, this command displays the files in the current working
directory.
This command has the same effect as that of the dir command.
Examples
# Display the files in the current directory.
sftp-client> ls
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
drwxrwxrwx
-rwxrwxrwx
Received status: End of file
Received status: Success
1.4.10 mkdir
Syntax
mkdir remote-path
View
SFTP client view
Parameters
remote-path: Name of a directory on the remote SFTP server.
Description
Use the mkdir command to create a directory on the remote SFTP server.
Examples
# Create a directory named hj on the remote SFTP server.
sftp-client>mkdir hj
Received status: Success
New directory created
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1-30
Chapter 1 FTP and SFTP Configuration
1759 Aug 23 06:52 config.cfg
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey1
225 Sep 28 08:28 pub1
0 Sep 28 08:24 new1
0 Sep 28 08:18 new2
225 Sep 28 08:30 pub2
Commands