Reset Ip Routing-Table Statistics Protocol - H3C S3100 Series Command Manual

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
VLAN 1 is the default management VLAN.
Example
# Configure VLAN 2 as the management VLAN.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] management-vlan 2

1.1.17 reset ip routing-table statistics protocol

Syntax
reset ip routing-table statistics protocol { all | protocol }
View
User view
Parameter
all: Specifies all protocols.
protocol: Specifies a protocol, which can be static, or direct.
Description
Use the reset ip routing-table statistics protocol command to clear the statistics of
routes in a routing table.
Example
# Before executing the reset ip routing-table statistics protocol command, use the
display ip routing-table statistics command to display the routing statistics:
<Sysname> display ip routing-table statistics
Routing tables:
Proto
DIRECT
STATIC
Total
# Clear the routing statistics of all protocols from the IP routing table.
<Sysname> reset ip routing-table statistics protocol all
This will erase the specific routing counters information.
Are you sure?[Y/N]y
# Display the routing statistics in the IP routing table.
<Sysname> display ip routing-table statistics
Routing tables:
Proto
route active
4 4
0 0
4 4
route active
Chapter 1 Management VLAN Configuration
added deleted
24 20
1 1
25 21
added deleted
1-20
Commands