H3C S3100 Series Command Manual page 97

Command Manual ( For Soliton ) – Management VLAN
H3C S3100 Series Ethernet Switches
View
Any view
Parameter
vlan-id: ID of the management VLAN interface.
Description
Use the display ip interface command to display the information about a specified
VLAN interface.
Example
# Display the information about VLAN-interface 1.
<Sysname> display ip interface Vlan-interface 1
Vlan-interface1 current state :UP
Line protocol current state :UP
Internet Address is 192.168.0.39/24 Primary
Broadcast address : 192.168.0.255
The Maximum Transmit Unit : 1500 bytes
IP packets input number: 7420, bytes: 557679, multicasts: 1
IP packets output number: 7509, bytes: 385809, multicasts: 0
TTL invalid packet number:
ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
Chapter 1 Management VLAN Configuration
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1-3
Commands